Product Description
- ♦FORMULA’s low center of gravity with the new flybarless main rotor head,Formula canopy & low body 370mm Height, effectively reduce the wind resistance.
- ♦In response to extreme 3D flights maneuver X7 is equipped with high strength One way Bearing & Main Gear assembly.
- ♦Removable Battery Tray.
- ♦Metal Tail case with spiral bevel gears has low noise & high strength features.
X7 FZ Battery Dimension
Content:
X7 FZ Basic Kit x 1 set HKII-4525-520KV Scorpion x1 Scorpion Tribunus 14-200A SBEC x1 11T Aluminum Pinion Gear Pack (Bevel )(for X7) x1 ServoKing BLS-6853 Digital Standard Size Brushle x3 ServoKing BLS-697i3 Digital Standard Size Brushl x1 HALO CF main blades 700L(CFA) x1 HALO CF Tail Rotor Blade Set(105mm) x1 Mikado Vbar Neo 6.1 Express 04945(*) x1 (*) This VBar NEO specifically manufactured for GAUI is a non VLink device. It can be set up using the VBar NEO PC Setup Software. It can be used with other radios than VBar Control right away, or of course with a VBar Control Satellite. This VBar NEO already has the antenna wires installed. You can make it VLink (means: enable the built-in receiver for VBar Control) with a simple software update via our App Store. To do this, connect to VBar Control Manager, click Applications, purchase VLink add. Cost would be EUR 49.00 incl. German VAT / EUR 41.18 excl. VAT. If you do not want to use the built-in VLink receiver, just tuck away the built-in antenna wires securely when wiring your model. You can also remove or cut the wires. But take note that in case you would ever want to enable the built-in receiver, you would have to mount the antenna wires again, or purchase new ones to replace the cut antenna wires. You could also need a replacement case if you accidentally damage the case at the time you remove or install antenna wires
Specifications:
Overall Length: 1340 mm Main Rotor Diameter: 1610mm Main rotor blades: 720mm Overall Height: 383mm Overall Width: 200mm Tail Blade Length: 105mm Tail Rotor Diameter: 290mm Flying duration: 4~5 minutes(3D flight ) Drive gear ratio: 10:1:4.71
Tools and Equipment for Assembly
*Transmitter(7-channel or more,helicopter system) *Receiver(7-channel or more) *Scorpion V Link II Cable *Digital Pitch Gauge *Battery :6S1P (22.2V/4200mAh ~5500 mAh) x 2pcs 2 mm Hexagon Screw Driver 2.5 mm Hexagon Screw Driver 3 mm Hexagon Screw Driver 3.5 mm Hexagon Screw Driver Needle-nosed pliers Diagonal cutting plier Ball Link Plier Phillips screwdriver Scissors High Strength Tape CA General thread lock Anaerobic adhesive Lubricant / one-way bearing grease AB glue