Product Description

: ♦We extend X5 V2 rotor head about 15mm to increase safety and stability

: ♦New battery position. Bigger battery place and adjustable CG.

: ♦X5 dual push Tail Pitch Slider Set

: ♦CF Tail Boom support rod

: ♦Tail boom support rod retainer.

: ♦CNC Tail Support Clamp & Horizontal Fin mount

Content:

X5 V2 Basic Kit x 1 set
Scorpion HKIII-4025-1100KV x 1set
Scorpion Tribunus 06-120A (SBEC) x 1set
ServoKing BLS-6853 Digital Standard Size Brushless Servo (Torque Type) x3
ServoKing BLS-697i3 Digital Standard Size Brushless Tail Servo x1
HALO Blades 550mm CF main Blades x 1set
HALO Blades 80mm CF Tail Rotor Blades x 1set
Mikado Vbar Neo 6.1 Express 04945(*) x 1set

(*) This VBar NEO specifically manufactured for GAUI is a non VLink device. It can be set up using the VBar NEO PC Setup Software.
It can be used with other radios than VBar Control right away, or of course with a VBar Control Satellite. This VBar NEO already has the antenna wires installed.
You can make it VLink (means: enable the built-in receiver for VBar Control) with a simple software update via our App Store.
To do this, connect to VBar Control Manager, click Applications, purchase VLink add. Cost would be EUR 49.00 incl. German VAT / EUR 41.18 excl. VAT.
If you do not want to use the built-in VLink receiver, just tuck away the built-in antenna wires securely when wiring your model.
You can also remove or cut the wires. But take note that in case you would ever want to enable the built-in receiver, you would have to mount the antenna wires again, or purchase new ones to replace the cut antenna wires. You could also need a replacement case if you accidentally damage the case at the time you remove or install antenna wires

Specifications:

Height: 336mm
Width: 165mm
Length (including canopy): 1054mm
Weight: 1150g +/-3% (without battery,CF main blades,electronics)
Main Blades: 500 ~ 550mm
Main blade rotation diameter 1225mm
Tail blade: MAX 82mm
Tail rotation diameter: 230mm
Flight time: 4~5minutes

X5+V2_550+spec-2-600x274

Scorpion HKIII-4025-1100KV (6mm) Specifications

Stator Diameter	40 mm(1.57 in)
Stator Thickness	25 mm(0.98 in)
No. of Stator Arms	12
Magnet Poles	10
Motor Wind	3T/3T Delta
Motor Wire	27-Strand 0.29mm
Motor Kv	1100KV RPM/Volt
No-Load Current (IO/10v)	3.19 Amps
Motor Resistance (RM)	0.008 Ohms
Max Continuous Current	100 Amps
Max Continuous Power	2200 Watts
Weight	354 Grams (10.79 oz)
Outside Diameter	49.98 mm (1.97 in)
Shaft Diameter	5.98 mm (0.24 in)
Body Length	51.8 mm (2.04 in)
Overall Shaft Length	83.7 mm (3.30 in)
Max Lipo Cell	6s
Peak Current	130 Amps (5 seconds)
Peak Continuous Power	2750 Watts (5 seconds)
Motor Timing	5deg
Drive Frequency	8kHz

Scorpion Tribunus 06-120A (SBEC) Specifications

Max Continuous Current	120 Amps
Peak Current	150Amps
Operating Voltage Range	11-26.1 Volts
BEC Output voltage:	5.1V to 8.3V adjustable.
Max Continuous BEC Output	10 Amps @ 8.3 V
Peak BEC Output	20 Amps/1s @ 8.3 V
On Resistance	0.4 mOhms *2
Size	23.7 x 37 x 73.8 mm (0.92 x 1.45 x 2.9 in)
Weight (Without Connectors)	108g (3.8 oz)

NX7 Dimension

Tools and Equipment for Assembly

*Transmitter(7-channel or more,helicopter system)
*Receiver(7-channel or more)
*Digital Pitch Gauge
*Scorpion V Link II Cable
*LiPo Battery: 6S1P(22.2v/ Max size:61x49x150mm)

*1.5 mm Hexagon Screw Driver
*2 mm Hexagon Screw Driver
*2.5 mm Hexagon Screw Driver
* Philips Screw Driver
* Lubricant / one-way bearing grease
* Spring calipers, Needle-nosed pliers
* General thread lock