850100-T-10 Engine Set (10cc)

T-10 Engine Set (10cc)

US$299.00

Listing Date: April~May 2014
*Gasoline Engine upgrade package (for NX4)

Out of stock

SKU: 850100. Category: .

Product Description

850100-Feature: *Gasoline Engine upgrade package (for NX4), economic low gasoline fuel    cost alternative. *Heat sink designed for NX4, large surface area to dissipate Engine heat,    anodized black & silver color CNC stylish design. *3D flights time can be as long as 14minutes to satisfy the most avid pilot. *Stable power output, combine with GAUI NX4 demonstrates the    power and torque outputs, absolutely a good choice for pilots flight practice. *Low Engine vibrations, comparable to most Nitro engine. *CDI low power consumption, 7.4V 800mAh battery can have a continuous    flight of 20minutes.

Specifications:

Displacement: 0.56cu in (9.18cc)
Practical Range: 2000~18000rpm
Output: 2.11 hp @ 17000 rpm
Normal operating temperature: 100 ~ 130℃
Bore/Stroke: 23mm/21.80mm
Ports: 3 Ports
Crankshaft: 15mm
Carburetor: 10mm
Exhaust Type: Side
Weight: 379g(545g)

Contents:

T-10 Gasoline Engine x 1pc
Engine Mount Bracket x 2pcs
Clutch mount x 1pc CDI x 1pc
Spark Plug x 1pc

Notices
1. Use independent Power sources for receiver and CDI. Keep CDI away from other electronic parts when
installing.
2. Please break-in new engine using at least 1000cc at idle speed to achieves maximum power output and
extends engine life.
3. Please use gasoline fuel tubing in fuel tank.
4. Exhaust back pressure method is not recommended.
5. Fuel mixture Ratio: 10:1. 10parts gasoline & 1part two-stroke engine oil
6. Auxiliary fuel tank and non-bubble weight are recommended in fuel system to prevent engine
stop. When air get into fuel tubing it will affect engine performance.
7. Make sure ignition wire and spark plug are tightened together. & not loose

 

Troubleshooting

850100-Troubleshooting

1. If throttle servo is shaking or interfered:
* Please adjust the angle of receiver antenna to reduce the interference.
* Please check the CDI ignition wire and spark plug connection. Make sure
they are all tightening together. (Install Step 4)
* Please make sure CDI is away from receiver at least 15cm.
* Please check wire surface and condition on CDI.
2. If the engine rotational speed changes very rapidly (slow) or jump between
fast and slow, please refer to troubleshooting 1. If the situation doesn’t get
better, please check the throttle servo’s for interference.

T-10 Parts Link

T-10 Engine Set (10cc)(850100)