Product Description

: ♦X3 Newly designed CNC main blade grip, with selectable 3 position pitch lever positions for different flight characteristics.

: ♦New side frames upgrade for bigger motor.

: ♦Tail drive design is the same as on the X7, reducing transmission structural components, increasing efficiency and ease of maintenance dramatically.

: ♦ New stylishly painted fiberglass canopy design.

Content:

X3L Basic Kit(385L) x 1 set

♦Tail Rotor Blade Set(62mm) x 1 set

Specifications:

●Overall Length (with Canopy): 709mm
●Main rotor diameter: 808mm (Main Blades 360mm) 858mm (Main Blades 385mm)
●Main blade length: 360~385 mm
●Overall Height: 212mm
●Overall Width: 87.8mm
●Tail Blade Length: 62 mm
●Tail Rotation Diameter: 164mm
●ESC: Minimum 50A ESC
●LiPo battery: 1000~ 1800 mAh
●BL Motor : 2520 / 3226
●Total weight: 515g ±3% (kit with canopy,w/o all electronics, blades and batteries.)

Required For Operation

*Transmitter(6-channel or more, helicopter system)
*Receiver(6-channel or more)
*CCPM Servo x3 (#0S2311) / Tail Servo x1(#0S2518)
*LiPo Battery :3S & 6S
*ESC: 50A+ ESC recommended(#0F1050)
*CF main blades(360~385mm)
*Flybarless System
*12~13T Pinion Gear
*BL Motor : 2520(#852205) / 3026(#0M1505)

Tools and Equipment for Assembly

*1.5 mm Hexagon Screw Driver
*2 mm Hexagon Screw Driver
*2.5 mm Hexagon Screw Driver
*Philips Screw Driver
*Lubricant / one-way bearing grease
*Spring calipers, Needle-nosed pliers
*General thread lock
All basic kit does not include a motor , need to purchase optionally .
The available pinions for X3 are as follows (Pinion 12T~13T) with drive gear ratio below:
12T 10.91 : 1 : 5.46
13T 10.07 : 1 : 5.46