Dear User of GAUI Mini VBar,
Thank you all for supporting great products from GAUI & MIKADO.
Thanks for the great support by Mikado!
Now former users of GAUI Mini VBar (with OEM Express Setup software) can now UPDATE their GAUI OEM Express to the FULL Mikado Express Free of charge!!!
*Remember to register your Mini VBar with your MikadoID
Request a license key. Activate the license by clicking on the email URL link received.
Then use your updated PC software to do Online Update, load the Full Express to update your Mini VBar.
In case you don’t know already, GAUI OEM Mini VBar upgrade to PRO version is now available at the same price as Mikado Blueline Mini Vbar at Euro35 (about USD45).
*Get your hand on a GAUI Mini VBar now and upgrade to the PRO software on Mikado Webshop!!!
GAUI Team
Dear GAUI customers.
GAUI X4 II was very well received in the RC helicopter market,
with its in-flight tracking accuracy, power attributes and the overall design characteristics.
However, during our continuous long term flight testing,
we have discovered a small weakness with regards to a part located in the side main frames.
In a situation where the helicopter is crashed, pressure is placed on one location in the side frames which has the tendency to break.
GAUI being a responsible manufacturer has improved and modified some parts to increase the rigidity of the main frames.
We ask that current customers of X4 II should contact their original place of purchase for exchange of their X4 II original parts
with the newly released upgraded parts (see attached photos).
Please accept our apology for any inconvenience this may cause.
However, please understand that these parts will reach our distributors at different times due to varying shipping conditions.
The exact time of exchange for upgraded parts should be based on information provided by your local Distributor or Dealer (your original place of purchase).
While you are still able to fly your X4 II in the meantime, please be mindful that should the model be crashed,
the likelihood of damage to the side frames is increased until the updated parts are installed.
Your truly,
GAUI Team
Original X4 II part (see attached photo) you should remove from your X4 II and send back to your original place of purchase
In exchange for new upgraded parts below.
Dear customers & pilots of X7
For those of you who have purchased an X7 Kit or spare parts:
#217001.217002.217003.217004.217005. KITS
#217122 -X7 Main Rotor Head Spindle SPARE PARTS
#217032-X7 Main Blade Grip
Please take note of the following parts update.
Please change the part to correctly update your Helicopter for safety concerns.
The update is as follows:
The X7 main rotor head assembly initially included a washer set W5x13x1.2 (P.28 of Instruction manual).
It has become apparent that after many flights, the washer can become deformed due to the high loads of the rotor head system.
If left unchecked, a part failure can occur. Since this part is a crucial component of the rotor head, please check if your X7 is using the new washer set (part W5x15x2).
If not please replace this washer set (W5x13x1.2mm) to the new standard washer set (W5x15x2mm)as soon as possible in order to ensure a safe flight.
For your reference, a photo is attached to identify these two washers.
Older washer set: W5x13x1.2mm
New washer set: W5x15x2mm
*Please note the slanted edge to help identify the new washer*
If you find that your X7 head contains an older style washer set, please contact your country’s GAUI distributor for a new washer set at no cost. Thank you for your cooperation and attention to this safety matter.
Our apology for any inconvenience caused.
*Please note X7 kits / spare parts shipped starting May 2012 use this new washer part.
GAUI Team
中文